TANK VENTING
The Scanjet marine tank vents are the most efficient in terms of capacity, vent line diameter and conservation of cargo and inert gas.
The Mark IV Supergreen high velocity valve is the result of dedicated research into creating the ideal compromise between loss of tank vapour and non-oscillating behaviour, producing a marine tank venting system in a simple package for ease of use.
Contact us
The cargo tank venting system undergoes its test facility including corrosion testing, flash-back, endurance burning, flow, and non-oscillating verification.
In addition, the Vocon mast riser system will reduce the operative pressure, and increase the VOC loss compared to leaving the SCANJET high-velocity valves with the dual nozzle system to take care of thermal venting during voyage.
Tank Venting Related Products
Flame Screens
The Flame Arrester Type FA and Flame Arrester Type FAV by Scanjet are critical safety devices designed for end-of-line installations in different scenarios based on the volume of the system they are intended to protect.
Scanvent Valves
The Mark IV SuperGreen high velocity tank level valve is the result of dedicated research into creating the ideal compromise between loss of tank vapour and non-oscillating behavior, all in a simple package that appeals to low maintenance.
Vocon Mast
The Vocon tank level valves are the only equipment needed to have an optimized VOC Management Plan on hand. By-pass pressure valve type BP—VOCON In-line automatic weight-loaded pressure valve for mast riser systems.
Gas Cover
The Gas Freeing Cover when integrated with the P/V valve, the system likely ensures a streamlined and cohesive approach to both pressure and gas management in cargo tanks.
Test Rigs
The Portable Calibration Test Rig, known as Type PCR, is a cutting-edge solution designed for the convenient and efficient verification of opening settings in various systems.
In-Line Valves
The In-line P/V Valve Type FPS by Scanjet is an Automatic Weight-Loaded Pressure Vacuum Valve designed for in-line installation on cargo tanks and inert gas (I.G.) mains.
SC 90A
The Scanjet Model SC F90A is a Portable Air Driven Fan specifically designed for use on Chemical Carriers. It can also be used on all other types of vessels where air is preferable to water for operational reasons. The fan is designed as a High Performance, Deep Penetration unit.
SC 150W
The Scanjet Model SC F150W Portable Water Driven Gas Freeing Fan is suitable for use on all sizes and types of vessels. The fan is designed as a High Performance, Deep Penetration Unit. Constructed from Stainless Steel and Aluminium it is lightweight and easily moved around the deck.
Certificates
